Parallel inverters to maximize inverter power

The sine wave inverter provides users with stable and distortion-free AC power through the conversion of DC input power; it provides power supplies with optional output voltage and frequency for sensitive equipment that must work in commercial power places.

1) BWT-DT2000 series parallel inverter power supply is an intelligent dedicated inverter power supply, using 32-bit DSP digital control technology, the control circuit is simple, reliable, and quickly responds to changes in the external environment

2) BWT-DT2000 series parallel inverter power supply adopts SPWM pulse width modulation technology, and the output is a pure sine wave with stable frequency and voltage stabilization, filtering of noise, and low distortion.

3) BWT-DT2000 series parallel inverter power supply has strong load capacity and built-in bypass switch, which improves the continuity and reliability of the inverter power supply

4) The DC input end of the BWT-DT2000 series parallel inverter power supply adopts advanced anti-injection noise suppression technology, which does not interfere with other communication equipment sharing the DC power supply. The demand for the main AC power supply of the application system

5) BWT-DT2000 series parallel inverter power supply can be flexibly set to AC main supply type and DC main supply type (can be set on-site through the LCD screen)

5.1 The AC main-supply inverter power supply is at the output of the mains when there is mains power, and automatically switches to the inverter output when the mains input fails.

5.2 The DC main-supply inverter power supply is in the inverter output when there is mains power, and automatically switches to the mains output when the DC input fails.

6) When the BWT-DT2000 series parallel inverter power supply fails, the buzzer will alarm, and the sound can be silenced by the silence button

7) The BWT-DT2000 series parallel inverter power supply is well-designed, allowing it to cut off the DC when it is turned on, and automatically switch to the mains bypass, which does not affect the power supply of the load, and facilitates the maintenance and replacement of the battery;

8) After the BWT-DT2000 series parallel inverter power supply shuts down the output when the battery voltage is high/low and overload alarm occurs, the battery voltage returns to normal. After eliminating the overload phenomenon, the inverter automatically restores the output after 5 minutes.

9) BWT-DT2000 series parallel inverter power supply supports AC power-on function, which is used to power on under DC fault conditions

10) The BWT-DT2000 series parallel inverter power supply provides two sets of passive dry junctions (with separate dry contact interfaces), which are used for normal startup and failure.

11) Communication method RS485, MODBUS protocol.